SheekGeek

Telescope Counterweights

November 21, 2020October 14, 2019 by Adam@SheekGeek

For some time now I’ve been interested in astrophotography, but my camera hanging off the back of my scope was too heavy for the clutch. The camera just weighted everything down. The solution is to add weights to the tube. You can buy a super expensive kit, but why do that when you can slap together a junky version yourself for much cheaper?

I ordered 24” of Mini T-track which can fit a 1/4” bolt head. When it arrived, I measured (by eye) the mini t-track against the side of my scope. I cut it leaving a short piece (which will be used later) and the actual weight section. I marked the two holes where the screws on the tube were. These are the screws that will hold the t-track to the tube. I actually drilled with two bits. One just the right size for the screws to pass through, and then I used another larger bit to remove the material from the top of the T-track and countersink the screws a bit. What isn’t shown below is a larger hole made in the top of the T-track so that I can easily add or remove weights without having to take the track off the tube.

I unscrewed the two bolts from my scope tube along the bottom. The whole time praying I don’t get any nasties in the tube during this escapade…

As for the weights, I used some 2” long 1/4” bolts and a 100 pack of 1.5” fender washers as weights.

I honestly didn’t count or measure the weights out, I just made a couple larger stacks of washers and a couple shorter ones. I used standard 1/4″ nuts as lock nuts to hold them on, though I wish I would have sprung for a cheap T-track knob set like this one which would make them easier to move around with one hand while I’m aiming and wrestling with the scope..

That little left-over piece of T track was great for a top-mount for a camera. I drilled a hole in the middle for the tube screw and added a great little folding tilt mount for a camera.

I used a really short 1” long 1/4” bolt to mount it.

Now I can put a camera on top as well as having a camera at prime focus of the scope. This can be used as a guide camera with a tracking program like PHD2 or another DSLR to take some additional wider-angled and less zoomed pics.

UPDATE: to make the weights not look so janky, I added thumbknobs and 3d printed black plastic sleeves for them. You can find the 3d printer files here to make them yourself.

Adding USB Power Ports for TV Accessories

September 16, 2019 by Adam@SheekGeek

The number of USB-powered devices around my TV has drastically increased over the last few years. With a Roku, Google Chromecast (requiring external power) and an amazon Echo dot or google home, and even sometimes to charge a phone, I felt like the wires were a mass of black spaghetti in my TV area. To fix this, I decided to replace the power outlet with one that incorporates USB power. I was sure to get one rated for as many amps on the output as possible to future-proof the whole setup and also to quick-charge my phone if I needed to.

The tools used were a small ratchet screwdriver set (not pictured), l, Wire Strippers/cutters (these from HanLong tools are the best I’ve ever used) and a non-contact AC voltage detector. If you can’t find the screwdriver set, just make sure you get a flathead and a phillips head screwdriver.

The first step is to turn power off at the breaker box! To check that you turned off the correct breaker, use the AC voltage detector by simply inserting it into each plug of the receptacle. If it flashed red and blinks repeatedly, then you didn’t turn off the right breaker. This is an important test because many time breaker boxes are labeled correctly, or for some reason the builder wired some lights or sockets to other breakers but never noted it on the breaker box.

Once the power is turned off, remove the front plate of the current outlet with a flat-head screwdriver. Why the hell they chose to make this a flathead screw, which can easily slip and cause you to jam your screwdriver into the outlet alludes me. That’s just bad design! Then you can use the phillips-head screwdriver to remove the outlet by unscrewing the screws at the top and bottom of the outlet.

Pull out the old outlet and I had to cut off the wires. Inside this box should be 3 colors of wire. The bare copper is the ground wire. That safely handles the power in case of a short circuit, shunting it to ground. Then you should have a white wire which is considered “Neutral” and either a Red or Black wire. Sometimes you’ll have both red and black wires. These two are the “Hot” wires. what you may not know is that the white Neutral and ground wires are connected together at the breaker box, but the red and black wires are two phases of 120v each. They use these together in multiple areas of a house such as a ceiling fan where one wall switch controls the light and the other controls the fan, or to wire things like your oven or dryer which needs 220v. The first thing to do is always wire the ground wire up. There’s no hard and fast rule about it, but it’s the order I like to do things. In this case you simply use a straight end of the ground wire and clamp it behind the brass plate where the green screw is on the outlet. The green screw on this kind of stuff is always ground.

Then move on to the actual power wires. In our case, I had what looked like 4 white wires. I pulled them out of the box a bit so I could see what was going on. The painters had been messy and painted the black wires white. I scraped a little paint off and then wired them up. You can follow the instructions on your new outlet for how to do this. In my case, I stripped about 1/2” of the insulation of the solid core wire, pushed it into the appropriate holes (labeled “hot” and “neutral” on the outlet) and screwed in the screws on the sides to clamp these wires in place. If you have both red and black wires in your box, do not wire them both to “hot” like I have. You need to read instructions for your particular outlet to see what to do with those. You may be able to just terminate one of these with a wire twist cap and electrical tape. I’m not sure what the building code says about that.

Once you are done, carefully shove all the wires back into the box and screw the box into place. This outlet is a bit bigger than the original one I had, so I had to fiddle with the ground wire connectors and wires to fit it all in the box. Once the outlet is secure, put the new faceplate on and you

are ready to turn the breaker back on and test it.

You can see the before and the after results of how this can clear up the mess of wires visible in the TV nook. You may also want to use zip ties or better yet, velcro strips to tidy wires p even more so.

Before: After:

Our Top Picks from the Etsy Design Awards #TheEtsies

February 26, 2020August 26, 2019 by Jessica@SheekGeek

For the first time ever, Etsy is running a global award program: The Etsy Design Awards. There are 160 global finalists that fall into one of the following five categories for #TheEtsies: Inventive Decor, Signature Style, Festive Celebrations, Earth-Friendly, and Creative Collaborations. We’ve done round-ups on favorite toddler products, but this is our first Etsy round-up.

Here are our top picks from #TheEtsies!

My Picks:

My top 5 choices represent items that inspire me to buy from Etsy or make myself.

minimalist wall calendar from Etsy seller

Calendar Wallplanner from the shop WiLaNo (Inventive Decor Category)

Custom Painted Photo Backdrop by the shop thesmallcreative

stylish pegboard organizer for your home

Monstera Leaf Wood Pegboard Organizer by the shop littleanana

I think this makes a perfect jewelry organizer, although I think I’d rather have the larger version (it’s almost twice as big!). I love the versatility of the moveable pegs. The dinosaur pegboard would also be a great addition to a child’s space. My daughter would love it in her room. Plus, I’m game for anything that will encourage my kid to clean!

Paper Cut Custom Portrait by the shop PurplePaperPeople

minimalist wood dollhouse for etsy design awards top pick

Large Modern Dollhouse “The Milky-house” by the shop MilkyWood

Well, we already made a dollhouse for our daughter with our CNC machine. But, if we hadn’t already done this ourselves I would totally buy this modern dollhouse.

Adam chose his ideas independently of me, and all his picks were different except one. He also picked the dollhouse! I chatted with him for his reasoning behind his picks. This is what he had to share:

Adam’s Picks:

My top choices are designs I appreciate in terms of their form, function, and material choices.

ECOWOOD Table Lamp by shop TedzukuriAtelier

This lamp uses an interesting recycled veneer from a banana’s plant trunk.

Custom House Portrait by shop yeiou

The use of white paper for a 3d representation of your home results in a minimalist, elegant design. This would make a great anniversary gift for parents.

Designer Cat House by PetsandPods

I feel like my cats would crawl into this immediately. It’s a cat bed you don’t mind having in a prominent location in your house.

Succulent Wedding Ring Holder by shop Waen

This ring dish stands on its own as decor, with or without a ring.

special wooden ring box for gift or proposal

Diamond shape engagement ring box by Woodstorming

Woodworking is one of my hobbies, and I like the movement of the lid on this uniquely shaped ring box.

From design inspiration to must-haves for your home, this round-up features a variety of designs. These top Etsy design awards picks for this year are based on our current tastes, which are ever-changing.

So, what is your favorite ETSY nominee for #TheEtsies and why?

Revamp Your Old Kitchen Table with this DIY Tile Idea

August 15, 2019 by Adam@SheekGeek

FTC disclosure: This post contains affiliate links, which means I may receive a commission for purchases made through my links.

We’ve had the same table for more than 10 years. It was showing some serious wear, especially once the little one came along. The table isn’t made of actual wood, it’s compressed dust with a thick wood veneer. For years Jess wanted to do a tile mosaic on top of this. Due to an abandoned project (I was going to build a tile gas fireplace for our patio), we had some tiles in the house. We had both this wood-patterned tile (which is on clearance for half off at the time of writing this blog post!) and this Spanish patterned tile. Both of these can be substituted for other tiles and patterns depending on your personal preferences and table preferences. For instance, this similar but more gray tone wood-patterned ceramic tile would pair well with this patterned tile.

We arranged our tiles on the table just to see what different designs might look like. Here were our three main options based on tile and table size:

1. ) This first arrangement idea was the Spanish tile on everything. This was too busy by itself, so we added our place mats to break up the pattern.

We weren’t really feeling that one, so we tried a different arrangement.

2.) The second idea was with a centerpiece of the Spanish tile and a border of tiles that look like wood planks. Overall we liked the look, but it didn’t work out well because the two types of tiles were ever-so-slightly different dimensions.

Plus, if you are going to go with a bold tile you might as well feature it, so…

3. For the third idea (which we picked) we laid out a Spanish tile centerpiece and border with the wood tile only in the middle.

Once this was decided, we glued the tile down to the table with acrylic adhesive. Once this dried for a week or so, we then grouted the cracks with a dark grout called “truffle”. A couple of things we learned was not to have too much water in the grout mix, otherwise it’ll dry with lighter whitish spots in places. This was (sort of) fixed by using white vinegar. Another thing we worried about was the edging. At first we just used the grout and our finger to cover the edge of the tile and smooth the transition to the table edge, but over time this proved quite fragile and pieces kept breaking off. The fix was to move to a silicone caulking material (in Charcoal color, the best match to the Truffle color we could find). This isn’t the first time we used silicone caulk as you can see on our hardwood to tile transition of our flooring.

When we applied the sanded silicone caulk, it didn’t look the same at first, but when it dried it became much darker and looks great!

First we laid out painters tape on the whole table, including around one tile that had come off when I got too aggressive digging out the grout on the edge. We then caulked around the edges with this sanded caulk, smoothed with a gloved hand and then peeled off the tape. Don’t touch it for a few days! It takes a long time to cure.

Overall, it has been holding up great to the wear and tear of our toddler. This DIY has brought new life to an old table.

Cat and Baby Door Catch Device

July 21, 2019 by Adam@SheekGeek

Since I don’t have the energy to commercialize this, I’m posting it on here. If anyone does commercialize it or some derivative, you gotta give me a fair cut.

There’s products out there to prevent toddlers from locking themselves in rooms by preventing the door to close all the way. This also helps make sure no tiny fingers get smashed in the door jambs. To add to that problem, our toddler liked closing the door to the room with the catboxes in it, or getting in this room and trying to play with the litter. This led to multiple accidents by the cats when we didn’t realize their door was shut for a whole day or so. and multiple close calls of our baby touching cat turds.

To fix this, I doodled up a door latch in Fusion 360 that would prevent the door from being shut too much so the cats can get in, but not open enough for a toddler to fit though. I 3D printed it on a Dremel 3d20 printer. I had at first attempted to print this in parts since it was so long, but regardless of how I made the interlocking mechanism, it always failed in one way or another. After about 5 attempts, I printed a single slightly shorter version with 40% infill and a handful of shells. This was strong indeed!

It worked well until a guest came over and slammed the door. Oh well. We had it for about a year which did the task of training the baby for the most part. We’ll still catch the door closed every once in a whole, but have only had one accident because of it.